top of page

UNMACTHED PERFORMANCE FOR YOUR TALARIA OR SUR-RON  

shutterstock_1590021904.jpg
5.png
ko red.png
2.png

ONLY

$699

KO MOTO NANO

WHY SHOULD I BUY A KO CONTROLLER?

It is very simple. We have made this controller and all of our controllers specifically for one purpose...to live on the front of your e-bike. Forget other controllers that have been made for a golf kart, go-kart, fork-lift or any other kind of micro mobility / hobby vehicle. Our controllers are made for your Sur-Ron and Talaria. As such they have a proper factory fit, with no extra hoops to jump through. We only use the highest quality components and quality control , unlike other controllers in the market which have suffered many issues of late. We fully test and design our products to be the best available, with proper IP67 waterproofing and all of the features you would expect from them without the need to pay extra for the software to work them or additional equipment to make them run properly. Below you will find details of our Nano controller and what makes it different from any other controller on the market for your Sur-Ron / Talaria highlighting why we offer the best and most suitable controller on the market for this sector.

shutterstock_1391202044.jpg

FACTORY FIT AND FINISH

IP67 - WATERPROOFING

5.png

FULL CNC HEATSINK

DIMENSIONS  278mm * 121mm * 54mm

CONTROLLER AESTHETICS

1) TRUE FACTORY FIT

 

This controller will fit to your Talaria, or Sur-Ron using the stock mounting positions on your bike. It will also connect directly to the cabling that comes with your bike as standard. This means that you don't have to do any additional procedures to fit, no extra cables, no extending phase wires and no extra messing around with brackets to get it on your bike.  It will fit just like a stock controller would, because it was made to fit this way.

​

2) PROPER WATERPOOFING

 

Unlike other controllers the nano was made to go on the front of your e-bike and designed for the outdoors. As such it has a full ip67 waterproof rating. You don't need to take any extra steps to waterproof your controller and all of the cabling that may see potential water ingress is fully potted to prevent internals damage.

​

3) FULL CNC HEATSINK

 

 All of our controllers offer a full CNC heatsink as part of the design, not as an after thought that you get charged extra for. The heatsink on our controller actually does its job at dissipating heat rather than other controllers where it serves as just a nicer looking cover. 

CONTROLLER COMPONENTRY

1) HIGH QUALITY TRUSTWORTHY

COMPONENTS

 

 The Nano controller has high quality components that we have performed extensive testing on and trust.  We never compromise on the quality of our work or components. We test all of the components that we use.

​

2) LEADING DESIGN

 

 The Nano controller is a complete in house project, both software and hardware is designed and manufactured by us to the latest industry standards and specifications. 

​

3) PC & ANDROID PHONE SOFTWARE COMPATIBLE.

​

The Nano controller is fully compatible with the KO Control suite for the pc and will also work with the KO Moto Android app (MAC version in development).

​

  

1.png
flag .png

UPGRADE CONTROLLER FOR SUR-RON & TALARIA

1.png

​

NOMINAL BATTERY VOLTAGE - 60 & 72V

​

MAX PHASE CURRENT - 520A 

​

MAX CURRENT 210A 

PEAK OUTPUT POWER - 17KW

​

INGRESS PROTECTION - IP67

​

OPERATING TEMPERATURE - -25—80℃

​

MAXIMUM EFFICIENCY - >95%

​

2.png

$699

60 & 72V COMPATIBLE

210A DC

520 PHASE AMPS

raod 2.png

ABOUT THE KO SOFTWARE - WHAT CONTROL DO YOU HAVE?

1) CHOOSE YOUR POWER AND FEEL.

Our software solution allows you to have maximum customisation of your ride. You have full control over DC power and phase amps for up to 200A DC and 560 Phase Amps. In addition you have access to multiple throttle curves, RPM torque adjustment, regen braking strength, throttle voltage adjustment and acceleration profile. These options are available through our PC software and Android / IOS app. You can also switch between 60 and 72v batteries with just a simple download and update. 

throttle calibration .jpg

2) WE WILL NEVER LOCK YOU OUT OF OUR SOFTWARE

Our software is open to retailers and end users alike. We want everyone to know that we will never lock them out of using our software, nor do they need to pay any extra for updates, or support for their KO product. The software that comes with all of our controllers is free to use and will remain free to all. We are not a third party developer so we will never charge or implement charges for you to use our products.

3) CUSTOMER SUPPORT

We offer free tuning support and technical help. Unlike many competitors where you are charged for a support call, we will never charge you for technical or tuning support calls. Our primary method for support is our discord server which has a community of hundreds of users. Here you can share information and tips along with requesting a one to one call with one of our support staff. We have dedicated support staff based in UK and USA time zones. We are happy to help any customers get the tune and the feel of their bike just right for them. A link to our discord channel will be sent automatically via email once a purchase as been made at which point you are free to join us any time you like.

bottom of page