**Improvements to magnet specificaion and wind change to give the ultimate performance **
**When you select the option, (bike type), we will provide the correct motor bracket for your bikes gearbox , normal sting (2 hole bracket), sting R (4 hole bracket)**
Be one of the first to receIve the KO Moto Talaria Factory Spec combo upgrade motor and controller. Designed from the ground up to give unmatched torque and power, without suffering from all of the issues that plague the stock sur-ron motor and controller offering.
Easy to fit
Both the motor and controller are designed to be a plug and play option in the Talaria and are easy to fit, using the same cabling and also the same default Talaria display unit. Gone is the need to upgrade your display unit and run additional extra cabling across your bike.
- Colour - Black
- INPUT VOLTAGE RANGE - 40v-100v
- WORKING VOLTAGE - 48-99.9V
- MAX PHASE CURRENT 1800A
- MAX CURRENT 600A
- MAXIMUM POWER - 60000W
- OPERATING TERMAPERATURE - -25—80℃
- INGRESS PROTECTION - IP67
- MAXIMUM EFFICIENCY - ＞95%
MOTOR CASING FEATURES
- Colour - Purple , Gold, Red, Blue
DIRECT DROP IN REPLACEMENT FOR TALARIA
MOTORWEIGHT (INCLUDING WIRES) - 10KG,
MOTORCYCLE GRADE ANODIZED FINISH FOR MAXIMUM DURABILITY AND HEAT DISPERSION (NOT POWER COATED).
7075 AIRCRAFT GRADE BILLET MACHINED END CAPS AND SENSOR CAP.
STAINLESS STEEL WATER PROOF PHASE AND SENSOR WIRE GLANDS.
INTERNAL MOTOR FEATURES
INTERNAL MAGNET MOTOR (IPM) KO DESIGNED MANUFACTURED ROTOR / STATOR.
STATOR DIMENSIONS - 160mm X 53mm.
WORKING VOLTAGE - 60V-100V.
COLD ROLLED SAE 1045 STEEL SHAFT
CUSTOM KO DESIGNED AND PATENTED ROTOR AND HEAT SINK DESIGN ALLOWS HEATSOAK DISSIPATION ON THE ENDS OF THE STATOR.
KO DESIGNED AND PATENTED INTERNALS PRESSURE EQUALIZATION SYSTEM COMPATIBLE.
KO DESIGNED AND PATENTED CRYO COLD AIR INJECTION SYSTEM COMPATIBLE.
KO DESIGNED AND MANUFACTURED CRYO ROTOR/ STATOR ANTI CORROSION COATING.
INDUSTRY LEADING SKF BEARING AND SEALS (OR EQUIVALENT) FOR THE LOWEST ROLLING RESISTANCE AND EFFICIENCY.
JAPANESE SOOURCED 0.35 NIPPON STEEL STATOR / ROTOR LAMINATED.
INDUSTRY LEADING 1.5mm AIR GAP.
INDUSTRY LEADING 150°C / 302F SH50 NEO MAGNETS.
HAND WOUND 220°C HIGH TEMP COPPER WINDINGS.
CUSTOM WATERPROOF DESIGNED (IP69) AND MANUFACTURED HALL SENSOR WITH 12 MONTH REPLACEMENT WARRANTY AGAINST WATER / MOISTURE DAMAGE.
MOTOR OPERATING SPECIFICATION
PEAK POWER - 35KW
MAX TORQUE @60V - 55NM
MAX STABLE ROTOR RPM - 12,000RPM
MAX EFFICIENCY 97%
**WARNING* Please note when installing your controller you must use the provided bolts to prevent damage. Using hex bolts can result to too much torque being applied to the connectors which can be damaged or even break off if too much force is applied. We provide Philips heads bolts with the controller to prevent this.